Decorative Bag Mix

PRODUCT DESCRIPTION

Overlay Bag-Mix: Premixed cement and extra-fine mineral aggregate, blended for maximum strength and urability.

d

BENEFITS

EVERLAST Overlay Bag-Mix is the answer to revitalizing unsightly pool decks and patios without the need to remove or cap as long as the base is tructurally sound.

s

RECOMMENDED USES

For use around swimming pools, patio decks, walkways, driveways and orches. For use indoors and outdoors.

p

NON-RECOMMENDED USES

For use loose or unstable base surfaces.

APPLICATION PROCESS

Preparation: Remove any loose material such as paint or chipped concrete. Degrease surface with EVERLAST BLACK NITRO degreaser using a 1 to 2 mix with water.

BAG MIX RATIO 1) 1 ½ gallons (6 quarts) of EVERLAST BONDING CATALYST to the EVERLAST BAG MIX in a 5-gallon plastic pail.

2) Place ½ of the bonding catalyst and mix slowly with ½ bag-mix. Continue with balance of catalyst and bag-mix. Let mix rest for 3 minutes and re-stir briefly. DO NOT OVER-MIX.

Application: OVERLAY MIXTURE can then be trowelled, squeegeed, or sprayed on to the surface not to exceed ¼” in thickness.

Remove all loose debris from the surface and apply two thin coatings of EVERLAST Acrylic Epoxy or suitable sealer according to expected traffic. Material may be walked on as soon as sealer is dry and cured (1 day). Automobile traffic may be llowed in 3 days.

a

MAINTENANCE

Clean surface with a soap/detergent on a repeated basis and rinse with resh water repeatedly.

f

PACKAGING

E

VERLAST BAG MIX: 60 lb. Bag

COLORS

EVERLAST BAG-MIX:

See EVERLAST Color chart for overlay material colors.

Custom colors are available at dditional cost.

a

AVAILABILITY

Available through distributors or ontact manufacturer.

c

TECHNICAL INFORMATION

Impact Strength

Test Procedure: A one pound steel ball with a diameter of 1.9” was dropped from a height of six feet onto the mortared surface.

Test Results: An indentation with a diameter of 0.45” was visible; however, no sign of cracking was present.

Tensile Strength 855 lbs.

Compressive Strength

28 Days. Test: ASTM C-109. Results (in psi):

28 days 7,200

Flexural Strength

Test Procedure: Samples were wrapped around a 3’ diameter cylinder with mortar side in tension.

Test Results: No visible signs of cracking were observed.

Thermal Expansion & Contraction

At 8,9,12, and 14 Days.

Test: ASTM C-531.

Final Result:

0.10% shrinkage, 9.09 x 10-6in2oF

Weight:1 lb/ft2, thickness: 0.125 in.

Thermal Conductivity

Test: ASTM C518-76 using 6.0 mm hickness specimen, 96.8 lb.ft. 75oF.

tResults: Apparent Thermal Conductivity 0.290 W/h.K, 2.01 BTU in 1hr/ft2oF.

Thermal Resistance

0.12 BTU-1hr/ft2oF.

SAFETY PRECAUTIONS

Keep away from prolonged contact with skin, and avoid splashing in eyes. Flush affected areas thoroughly with water to remove.

KEEP AWAY FROM CHILDREN