MSDS
Color Hardeners
MSDS
Concrete Surfaces
Neutral Base Stain
Pond Seal
Acid Stains
Bonding Agents
Overlay Resin
Color Releases
Color Hardeners
Countertop Mix
Stone Mix
Shaping Mix
Accelerator

A production line; Size=130 pixels

 

Complies with OSHA’s Hazard Communication Standard, 29 CFR 1910.1200

IDENTITY

Color Hardener(All Colors)

SECTION – MANUFACTURER

Concrete Surfaces

SECTION II – HAZARDOUS INGREDIENTS/IDENTITY INFORMATION

Components % OSHA-PEL ACGIH-TLV

Mineral Filler 10-20 5mg/m3 15mg/m3

Free Si02 2 10mg/m3 5mg/m3

None of the components of the mixture are considered Hazardous Material or

carcinogens (1910.1200 Hazard Communication (d)(4).

TRANSPORTATION INFORMATION

DOT Classification: NA

SECTION III – PHYSICAL/CHEMICAL CHARACTERISTICS

Boiling Point: Not know to boil Specific Gravity(520=1): 2.2

Vapor Pressure: NA Melting Point:NA

Vapor Density(Air=1): NA Evaporation:NA

Solubility in Water: Negligible

Appearance: Varies depending on color ordered .

SECTION IV – FIRE AND EXPLOSION DATA

Flash Point (Tag Closed Cup): NA

Flammable Limits: NA

SECTION V – REACTIVITY DATA

Stability : Stable

Incompatibility: None

Hazardous Decomposition (By-products): None

Hazardous Polymerization: Will not occur.

SECTION VI – HEALTH HAZARD DATA

ROUTES OF EXPOSURE

Inhalation? Yes Skin? Yes Eyes? Yes

HUMAN EFFECTS AND SYMPTOMS OF OVEREXPOSURE

Acute: Nuisance Dust

Chronic: No chronic health effects are known from repeated exposure to iron oxide

pigments.

Medical Conditions: Aggravated by Exposure: None Known.

Carcinogenicity: Not applicable

EXPOSURE LIMITS

OSHA PEL: Not established for this product

ACGIH TLV: Not established of the product. The recommended guideline is the

TLV for nuisance particulates, 10mg/m3 of total dust.

EMERGENCY AND FIRST AID PROCEDURES

Eye Contact: Flush eye with plenty of water, lifting lids periodically for at least 15

minutes. Consult a physician if irritation persists.

Skin Contact: Wash with soap and water.

Inhalation: Remove form dusty area to fresh air. If not breathing give artificial

respiration. If breathing is difficult, give oxygen. Call a physician.

Ingestion: Immediately contact a physician.

SECTION VII – PRECAUTIONS FOR SAFE HANDLING AND USE

Steps to be Taken in Case Material is Released or Spilled: Common

housekeeping, vacuum or scoop material into a container for reclamation or

disposal.

Waste Disposal Method: Material that cannot be reclaimed should be landfilled

in accordance with local, state, and federal regulations.

Precautions to be Taken in Handling and Storing: Store in dry area. Material

should be kept dry. Avoid breathing dust. Avoid contact with eyes and skin.

Wash thoroughly after handling.

Other Precautions: None

 

SECTION VIII – CONTROL MEASURES

Respiratory Protection: NIOSH approved dust respirator when required for dust.

Ventilation: Observe EPA standards

Protective Gloves: For Sensitive Skin

Protective Glasses: Safety goggles or face shield to protect against accidental

splashes

Other Protective Clothing or Equipment: Safety showers and eye wash stations

should be available.

Work/Hygiene Practices: Wash thoroughly with soap and water before eating,

smoking or using washroom. Remove and wash contaminated clothing before

re-use

Although the information and recommendations set forth herein (hereinafter

"information") are presented in good faith and believed to be correct as of the date

hereof, Concrete Surfaces makes no representations as to the completeness

or accuracy thereof. Information is supplied upon the condition that the persons

receiving same will make their own determination as to its suitability for their purposes

prior to use. In no event will Concrete Surfaces be responsible for damages

of any nature whatsoever resulting from the use of or reliance upon information. No

representations or warranties, wither express or implied, of merchantability, fitness for a

particular purpose or of any other nature are made hereunder with respect to information

or the product to which information refers.

 

Concrete Surfaces